Konica Minolta Bizhub 282 User Manual

10
Specifying management settings
10-38 bizhub 362/282/222
Specifying whether to add the transmission source information when
faxing or when forwarding received documents (mode 352)
You can specify how the transmission source information is added when
faxing directly and when forwarding received documents.
Factory settings
Specifying settings
The shaded cells represent the factory settings. The page numbers on the
right refer to the descriptions of the corresponding functions.
Bit 7 6 5 4 3 2 1 0
Setting 1 1 0 1 0 0 0 0 (HEX: D0)
Bit Description Status Description Page
Refer-
ence
7, 6 -----------------------------
11 *Do not change this bit when
specifying settings for this
function.
---------
5 Specifies whether transmis-
sion source information is
added when forwarding re-
ceived documents.
0 Not added page 10-
5
1 Added
4 Specifies how transmission
source information is added
when forwarding received
documents.
0 Outside body text ---------
1 Inside body text
3, 2, 1, 0 -----------------------------
0000 *Do not change these bits
when specifying settings for
this function.
---------

Konica Minolta Bizhub 282 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Maximum Paper Size	A4
Duplex Printing	Yes
Printing Technology	Laser
Original Size	A4
Print Speed	28 ppm
Copy Speed	28 cpm
Network Connectivity	Ethernet
USB Connectivity	Yes
Zoom Range	25% - 400%
Scan Speed (B&W)	28 ipm