bizhub C3850/C3350 2-25
2.8 Searching for a destination using the LDAP server
2
Using SSL communication
Communication between this machine and the LDAP server is encrypted with SSL.
Configure the setting if your environment requires SSL encryption communication with the LDAP server. To
make SSL communications, enable SSL.
In the administrator mode, select [Network] - [LDAP Settings] - [LDAP Server Registration], then configure the
following settings.
Settings Description
[SSL/TLS] Select [Enable] to use SSL communication.
[Disable] is specified by default.
[Port Number (SSL)] If necessary, change the SSL communication port number.
Normally, you can use the original port number.
[636] is specified by default.
To Next Page
Loading...
Need help?
General
