2-16 bizhub C3850/C3350
Configuring the WS print operating environment
2
2.6
2.6 Configuring the WS print operating environment
Overview
If the Web service function that is available in Windows Vista or later (Windows Vista/7/8/Server 2008/Server
2008 R2/Server 2012) is used, this machine that is connected to the network is automatically detected and
easily installed as a Web service printer.
HTTP is used for communication between this machine and the computer. In addition, using SSL to encrypt
a communication between the this machine and the computer enables more secure printing.
When using the WS printing function, follow the below procedure to configure the settings.
1 Configure settings for connecting to the network such as setting of the IP address of this machine
% For details on configuring the setting, refer to page 1-4.
2 Configuring basic settings for the WS printing
% For details on configuring the setting, refer to page 2-16.
3 Set the following options according to your environment
dReference
For details on how to configure settings on the computer, refer to page 3-14.
Configuring basic settings for the WS printing
Enable printing using the Web service. Also, configure settings used to detect this machine using the Web
service, and define information of this machine used as a printer.
1 In the administrator mode, select [Network] - [Web Service Settings] - [Common Settings], then config-
ure the following settings.
2 In the administrator mode, select [Network] - [Web Service Settings] - [Printer Settings], then configure
the following settings.
Purpose Reference
Communicate with the computer using SSL page 2-17
Settings Description
[Friendly Name] Enter the name of this machine to be displayed when this machine is
searched for using the Web service through a computer (using up to 127
bytes).
Settings Description
[Print Function] Select [Enable] to use the WS print function.
[Enable] is specified by default.
[Printer Name] Enter the name of this machine when using it as a WS printer, (using up to
127 bytes, excluding !, \, and ,).
[Printer Location] If necessary, enter the installation location of the printer (using up to 127
bytes).
[Printer Information] If necessary, enter the printer information (using up to 127 bytes).
To Next Page
Loading...
Need help?
General
