bizhub C3850/C3350 1-57
1.5 Available operations in Administrator mode
1
[E-mail Settings] - [E-mail RX (POP)]
To display: Administrator mode - [Network] - [E-mail Settings] - [E-mail RX (POP)]
Configure the settings on the E-mail reception function of this machine.
[POP Before SMTP] Select whether or not to use POP before SMTP.
Configure the setting if your environment requires the POP Before SMTP Au-
thentication for sending an E-mail.
[Disable] is specified by default.
[POP Before SMTP
Time]
If necessary, change the waiting time until starting E-mail transmission after
the POP authentication is successful.
[5] sec. is specified by default.
[SMTP Authentication] Configure the setting if your environment requires the SMTP authentication for
sending an E-mail.
[SMTP Authentica-
tion]
Select whether or not to use SMTP authentication.
[Disable] is specified by default.
[Account] When you have selected [Enable] in [SMTP Authentication], enter the user ID
for SMTP authentication (using up to 255 bytes).
[Password] When you have selected [Enable] in [SMTP Authentication], enter the pass-
word (using up to 128 bytes).
To enter (change) the password, select the [Change Password] check box,
then enter a new password.
[Domain Name] When you have selected [Enable] in [SMTP Authentication], enter the domain
name (realm) for SMTP authentication (using ASCII characters of up to 255
bytes).
This item is necessary when the SMTP authentication method is Digest-MD5.
Item Description
Item Description
[E-mail RX (POP)] Select whether or not to enable this machine to receive E-mails.
[Enable] is specified by default.
[POP Server Address] Enter the address of your E-mail server (POP).
Use one of the following formats.
• Example of host name entry: "host.example.com"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
[Port Number] If necessary, change the port number of the E-mail server (POP).
[110] is specified by default.
[SSL/TLS] Select whether or not to use SSL for communication with the E-mail server
(POP).
[Disable] is specified by default.
[Port Number (SSL)] If necessary, change the SSL communication port number.
[995] is specified by default.
[Login Name] Enter the login name when E-mails are received using the E-mail server (POP)
(using ASCII characters of up to 63 bytes).
[Password] Enter the password (using ASCII characters of up to 15 bytes).
To enter (change) the password, select the [Change Password] check box,
then enter a new password.
[Connection Timeout] Change the time-out time to communicate with the E-mail server (POP), if nec-
essary.
[60 sec.] is specified by default.
[APOP Authentication] Select whether or not to enable APOP authentication when logging in to the E-
mail server (POP).
This item is available when using APOP in your environment.
[Disable] is specified by default.
[Auto Check of Arrival] Select whether or not to check for incoming E-mails by periodically connecting
this machine to the E-mail server (POP).
[Disable] is specified by default.
To Next Page
Loading...
Need help?
General
