1-46 bizhub C3850/C3350
Available operations in Administrator mode
1
1.5
[Default Settings] - [PostScript Settings]
To display: Administrator mode - [Print] - [Default Settings] - [PostScript Settings]
Configure the PostScript print settings.
Item Description
[PostScript Settings] Specify the default values for PostScript print settings.
[Wait Timeout] Specify the time-out period after it is judged as PS error.
If you select [0], time-out will not work.
[0] is specified by default.
[PS Protocol] Select the protocol that is used for PS data communication.
If you select [Auto], an appropriate protocol is automatically determined from
the PS print jobs.
[Auto] is specified by default.
[Print to PS Error] Select whether or not to print error information when an error occurs during PS
rasterization.
[Off] is specified by default.
[Auto Trapping] Select whether or not to enable the auto trapping.
If you enable the auto trapping, printing is carried out by superimposing neigh-
boring colors so as to prevent white space being generated around a picture.
[Off] is specified by default.
[Black Overprint] Select whether or not to enable the black overprint.
Enable the black overprint to superimpose black color on a neighboring color
to print so as to prevent white space being generated around black characters
or figures.
• [Text]: Printing is carried out by superimposing black color on neighboring
colors only in the text portion.
• [Text/Graphic]: Printing is carried out by superimposing black color on
neighboring colors in both of the text portion and figure portion.
[Off] is specified by default.
[Print Quality Settings] Adjust the image quality for PostScript printing.