bizhub C3850/C3350 2-15
2.5 Configuring the WS Scan operating environment
2
Using SSL communication
Communication between this machine and the computer is encrypted with SSL.
To encrypt SSL communication between this machine and the computer, you must set the bidirectional SSL
communication between them. Before starting this procedure, confirm the following.
- Name resolution must have been performed in the DNS server.
- If the certificate of this machine is not issued by the Certificate Authority (CA), you must register the
certificate of this machine in [Trusted Root Certification Authorities] of the computer.
- Create a certificate on the computer in advance, and associate it with the TCP/IP communication port
(default port number: 5358).
To make SSL communications, enable SSL.
In the administrator mode, select [Network] - [Web Service Settings] - [Common Settings], then configure the
following settings.
In Windows 8, a communication using the Web service cannot be encrypted using SSL.
Settings Description
[Secure Mode] Select [Enable] to use SSL communication.
[Disable] is specified by default.
To Next Page
Loading...
Need help?
General
