24 Easy scan utility
Using the Easy Scan Utility
When the Easy Scan Utility is launched, the Easy Scan Wizard opens. Simply follow the instruc-
tions on the Wizard to scan images.
A screen requesting a film holder appears. Load and insert
the holder following the instructions in the loading a film
holder section of the hardware manual.
If the optional APS adapter is used, an index scan will be
made and the next window is skipped. The APS auto-detect
function automatically sets the film type between color and
black and white, and positive and negative.
The status bar at the top of each window gives instructions or describes the function on which
the mouse pointer is located.
To exit the Easy Scan Utility at any point, click the quit button in the bottom left corner of the
window. The film holder will be ejected automatically.
When scanning 35mm film, click the
appropriate button to specify the film
type; film for slides is positive film, and
film for prints is negative film. The bor-
der of the film-type button is highlight-
ed to indicate the selection. Click the
Next button to begin an index scan.
Film-type buttons
To cancel an index scan, prescan, or final scan once it has started, click and hold the mouse
on the cancel button in the progress dialog box or press and hold the command and period
(.) keys until the cancel button appears to depress.
Scanner Notes (Macintosh)
To Next Page
Loading...
Need help?
General
