12 BRAKE SYSTEM 181
12.1 Adjusting the basic position of the hand brake lever
100711-10
– Pull the brake lever forwards.
– Adjust the basic setting of the hand brake lever to your hand size by turning adjusting
wheel
.
Info
Do not make any adjustments while riding!
12.2 Checking the front brake discs
Warning
Danger of accidents Reduced braking efficiency due to worn brake disc(s).
– Change the worn brake disc(s) without delay. (Your authorized KTM workshop will be pleased to help.)
100135-10
– Check the thickness of the brake disc in several places to see if it is within the speci-
fied wear tolerance
.
Info
Wear reduces the thickness of the brake discs in area
of the brake discs.
Brake discs - wear limit
Front 4.5 mm (0.177 in)
» If the brake disc thickness is less than the specified value:
– Change the brake discs.
To Next Page
Loading...
Need help?
General
