12 BRAKE SYSTEM 185
100714-10
Main work
– Move the brake fluid reservoir mounted on the handlebar to a horizontal position.
– Loosen screw.
–
Remove cap
with membrane
.
– Add brake fluid to the MAX level.
Brake fluid DOT 4 / DOT 5.1 ( p. 268)
– Position the cap with the membrane. Mount and tighten the screws.
Info
Clean up overflowed or spilt brake fluid immediately with water.
12.6 Checking the front brake linings
Warning
Danger of accidents Reduced braking efficiency caused by worn brake linings.
– Change worn brake linings immediately. (Your authorized KTM workshop will be pleased to help.)
Note
Danger of accidents Reduced braking efficiency caused by damaged brake discs.
– If the brake linings are not changed in time, the steel brake lining carriers grind on the brake disc. The braking effect is greatly
reduced and the brake discs are destroyed. Check the brake linings regularly.
To Next Page
Loading...
Need help?
General
