KTM 200 EXC EU 2010 User Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE 88
B00047-10
– Place a cloth beneath the carburetor to soak up emerging fuel.
– Remove plug .
– Completely drain the fuel.
– Mount and tighten the plug.
11.106Checking the gear oil level
Info
The gear oil level must be checked when the engine is cold.
– Stand the motorcycle upright on a horizontal surface.
B00049-10
(All 125/150/200 models)
– Remove gear oil level check screw .
– Check the gear oil level.
A small amount of gear oil should flow out of the hole.
» If no gear oil flows out:
–
Add gear oil. x ( p. 90)
– Mount and tighten the gear oil level check screw.
Guideline
Screw, gear oil level check M6 10 Nm
(7.4 lbf ft)
B00050-10
(All 250/300 models)
– Remove gear oil level check screw .
– Check the gear oil level.
A small amount of gear oil should flow out of the hole.
» If no gear oil flows out:
–
Add gear oil. x ( p. 90)
– Mount and tighten the gear oil level check screw.
Guideline
Screw, gear oil level check M6 10 Nm
(7.4 lbf ft)
11.107Changing the gear oil x
400721-01
–
Drain the gear oil. x ( p. 89)
400722-01
–
Refill with gear oil. x ( p. 89)

KTM 200 EXC EU 2010 Specifications

General

Brand	KTM
Model	200 EXC EU 2010
Category	Motorcycle
Language	English