13 SERVICE WORK ON THE CHASSIS
218
Guideline
Nut, rear wheel
spindle
M25x1.5 90 Nm (66.4 lbf ft)
Thread and contact area
of wheel spindle greased
Finishing work
– Check the chain tension. ( p. 214)
13.11 Checking the chain, rear sprocket, engine sprocket, and chain guide
Preparatory work
– Raise motorcycle with rear lifting gear. ( p. 207)
100132-10
Main work
– Check the chain, rear sprocket, and engine sprocket for wear.
» If the chain, rear sprocket or engine sprocket is worn:
– Change the drivetrain kit.
Info
The engine sprocket, rear sprocket, and chain
should always be replaced together.
To Next Page
Loading...
Need help?
General
