BRAKE SYSTEM 14
271
F02093-10
– Check all brake linings on both brake calipers to ensure they
have the minimum thickness
A
.
Minimum thickness
A
≥ 1 mm (≥ 0.04 in)
» If the minimum thickness is less than specified:
– Change the front brake linings.
– Check all brake linings on both brake calipers for damage and
cracking.
» If there is damage or cracking:
– Change the front brake linings.
14.6 Checking the free travel of the foot brake lever
Warning
Danger of accidents The brake system fails in the event of overheating.
If there is no free travel on the foot brake lever, pressure builds up in the brake system on the rear
brake.
– Set the free travel on the foot brake lever in accordance with the specification.
To Next Page
Loading...
Need help?
General
