ELECTRICAL SYSTEM 134
13.8Installing the headlight mask with the headlight
100591-10
– Connect plug-in connector .
– Check the lighting function.
– Position the headlight mask.
– Install the front side cover. ( p. 80)
– Check the headlight setting. ( p. 140)
13.9Changing the low beam bulb
Note
Damage to reflector Reduced luminance.
– Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
– Remove the headlight mask with the headlight. ( p. 132)
To Next Page
Loading...
Need help?
General
