CONTROLS 34
5.28Socket for electrical accessories
B00116-10
The socket for electrical accessories is located to the left of the combination instrument.
It is connected to the battery without an additional switch.
Socket for electrical accessories
Voltage 12 V
Maximum current con-
sumption
10 A
5.29Hazard warning flasher switch/hazard warning flasher
B00116-11
The hazard warning flasher switch is found to the left of the combination instrument.
The hazard warning flasher is used to indicate emergency situations.
Info
The hazard warning flasher can be activated or deactivated while the ignition is
switched on or up to 30 seconds after the ignition is switched off.
To spare battery power, only press the hazard warning flasher as long as necessary.
Possible states
Hazard warning flasher off
Hazard warning flasher on – All four turn signals, the hazard warning
flasher switch and the green turn signal indicator lamp in the combination
instrument flash.
To Next Page
Loading...
Need help?
General
