SERVICE SCHEDULE 63
8.1Service schedule
K10N K75A K150A K300A
Check that the electrical equipment is functioning properly. • • • •
Read out the trouble code memory using the KTM diagnostics tool. x
• • • •
Check the measured service values with the KTM diagnostics tool. x
• • •
Change the engine oil and filter, clean the oil screens. x ( p. 160)
• • • •
Check the oil jet for the clutch lubrication. x
• • •
Check the front brake linings. ( p. 104) • • • •
Check the rear brake linings. ( p. 108) • • • •
Check the brake discs. ( p. 100) • • • •
Check that the brake lines are undamaged and free of leaks. • • • •
Check the rear brake fluid level. ( p. 105) • • • •
Check the free travel of the foot brake lever. ( p. 104) • • • •
Check that the shock absorber and fork are leak tight. Perform a fork service and shock absorber
service as needed and depending on how the vehicle will be used.
• • • •
Check the swingarm bearing. x
• • •
Check the wheel bearing for play. x
• • •
Check the tire condition. ( p. 118) • • • •
Check the tire air pressure. ( p. 119) • • • •
Check the spoke tension. ( p. 120) • • • •
Check the rim run-out. x
• • • •
Check the chain, rear sprocket and engine sprocket. ( p. 92) • • •
Check the chain tension. ( p. 89) • • • •
To Next Page
Loading...
Need help?
General
