MAINTENANCE WORK ON FRAME AND ENGINE 100
Info
Turn the adjustment screw clockwise to reduce free travel. The pressure point
moves away from the handlebar.
Turn the adjustment screw counterclockwise to increase free travel. The pressure
point moves towards the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!
Checking the front brake fluid level
Warning
Danger of accidents Failure of the brake system.
– If the brake fluid level falls below the MIN mark, this indicates a leakage in the brake system or worn-out brake linings. Check
the brake system and do not continue riding. (Your authorized KTM workshop will be glad to help.)
Warning
Danger of accidents Reduced braking effect caused by old brake fluid.
– Change the brake fluid of the front and rear brakes according to the service schedule. (Your authorized KTM workshop will be
glad to help.)
To Next Page
Loading...
Need help?
General
