MAINTENANCE WORK ON FRAME AND ENGINE 87
Info
The handwheel can be swung out to make settings.
Turn clockwise to increase the spring preload; turn counterclockwise to reduce
the spring preload.
Bleeding the fork legs
– Jack up the vehicle on the center stand. (
p. 75)
100536-10
– Remove bleeder screws briefly.
Any excess pressure escapes from the interior of the fork.
– Mount and tighten the bleeder screws.
Info
Carry out this operation on both fork legs.
Cleaning the dust boots of the fork legs
– Jack up the vehicle on the center stand. (
p. 75)
To Next Page
Loading...
Need help?
General
