MAINTENANCE WORK ON FRAME AND ENGINE 137
– Remove the headlight mask with the headlight. ( p. 135)
100647-10
– Remove rubber cap and connector from the bulb.
100648-10
– Turn holding ring counterclockwise all the way and take bulb out of the headlight.
– Position the new bulb in the headlight and fix it with the holding ring.
Low beam/high beam (H4 / socket P43t) ( p. 199)
Info
The projections of the lamp must engage in the recess of the headlight housing.
– Connect the connector and mount the rubber cap.
– Install the headlight mask with the headlight. ( p. 136)
Changing the parking light bulb in the headlight
Note
Damage to reflector Reduced luminance.
– Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
To Next Page
Loading...
Need help?
General
