MAINTENANCE WORK ON FRAME AND ENGINE 152
100609-10
– Park the motorcycle on a horizontal surface.
– Check the coolant level in the compensating tank .
The coolant level must be between MIN and MAX.
» If there is no coolant in the compensating tank:
–
Check the cooling system for leaks. x
Info
Do not start up the motorcycle!
–
Fill/bleed the cooling system. x ( p. 156)
» If the coolant in the compensating tank is not at the required level, but the tank is
not empty:
– Remove the compensating tank cap.
– Add coolant to the MAX marking.
Alternative 1
Coolant ( p. 210)
Alternative 2
Coolant (mixed ready to use) ( p. 210)
– Mount the cap of the compensating tank.
Checking the antifreeze and coolant level
Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
– Do not remove the radiator cap, radiator hoses or other cooling system components when the engine is hot. Allow the engine
and cooling system to cool down. In case of scalding, rinse immediately with lukewarm water.
To Next Page
Loading...
Need help?
General
