MAINTENANCE WORK ON FRAME AND ENGINE 131
100586-10
Changing the fuse of the ABS return pump:
– Remove protective cover and remove fuse .
Info
A spare fuse is located next to the fuse box in the storage compartment.
– Install the new fuse.
Fuse (58011109140) ( p. 199)
– Check whether the ABS warning lamp is still lit.
– Mount the protective cover.
Tip
Place the spare fuse in the storage compartment so that it is available if
needed.
– Install the right underride guard. ( p. 127)
Changing the fuses in the fuse box
Warning
Fire hazard The electrical system can be overloaded by the use of incorrect fuses.
– Use only fuses with the prescribed amperage. Never by-pass or repair fuses.
Info
The fuse box containing the fuses of remaining power consumers is located in the storage compartment.
– Switch off all power consumers and the engine.
– Open the storage compartment. ( p. 47)
To Next Page
Loading...
Need help?
General
