CONTROLS 45
Opening the filler caps
302078-10
– Lift the cover of the filler cap and insert the ignition key in the lock.
Note
Danger of damage Ignition key breakage.
– To take pressure off of the ignition key, push down on the filler cap. Damaged igni-
tion keys must be replaced.
– Turn the ignition key 90° clockwise.
– Raise the filler cap, withdraw the ignition key and open the second filler cap.
– Remove the ignition key.
Info
The motorcycle is equipped with two fuel tanks and two filler necks. The fuel
tanks are connected to each other with a fuel line that equalizes the fuel level.
The two filler caps are equipped with a ventilation system.
Closing the filler caps
100515-10
Warning
Fire hazard Fuel is highly flammable, poisonous and harmful to your health.
– When closing the filler cap, ensure that it is closed correctly. Change cloth-
ing that came into contact with fuel. Immediately clean skin that came into
contact with fuel using soap and water.
– Push the filler caps closed until the locks engage.
– Close the covers.
To Next Page
Loading...
Need help?
General
