11CHECKS BEFORE START
BHeadlight Switch
To avoid personal injury or death:
A For night operation, keep all machine mounted
lights operating. Check for burned out lights
and replace immediately.
The switch has 3 positions. When positioned on your side,
the lights stay off. Move the switch to the first position to
turn on the clearance light, and to the second position to
turn on the headlight low-beam.
BHazard Lamp Switch
Press the hazard lamp switch for the hazard lamps to
blink.
BAttachment Unlock Switch
The attachment unlock switch is applied for hydraulic
quick coupler. This switch must be applied for safety
reason when the attachment locking shall be unlocked.
The quick coupler is ready for unlocking only while the
switch is depressed. For detail procedure, refer to page 40
to 43.
(1) Headlight switch
(1) Hazard lamp switch
(1) Attachment unlock switch (A) UNLOCK
(B) LOCK
To Next Page
Loading...
Need help?
General
