21CHECKS BEFORE START
CABIN TYPE MACHINE
BFront Wiper / Washer Switch
Before moving the windscreen wiper, make sure the
starter key is at the "RUN" position and then turn on the
windscreen wiper switch.
Position 0: The wiper is in neutral.
Position : The wiper moves at regular intervals.
Position I: The wiper moves at normal speed.
Push the ring toward the steering wheel, and the washer
system gets started.
A Do not activate the washer switch if the tank for the
cleaning fluid is empty; the pump can be damaged.
A Do not activate the wiper switch if the window is dry. In
this case, make sure that cleaning fluid is applied to
the window pane before activating the wiper.
A In frosty conditions, make sure that the wiper blade is
not frozen to the glass before switching-on. The motor
can be damaged if the wiper system is used under
such conditions.
BRear Wiper/ Washer Switch
To move the rear wiper, turn on the switch for the rear
wiper when the starter key in position "RUN". A further
push on the switch will activate the washer system. Even
when the wiper switch is in position "OFF", the washer
switch functions if it is pressed.
A Do not activate the washer switch if the tank for the
cleaning fluid is empty; the pump can be damaged.
A Do not activate the wiper switch if the window is dry. In
this case, make sure that cleaning fluid is applied to
the window pane before activating the wiper.
A In frosty conditions, make sure that the wiper blade is
not frozen to the glass before switching-on. The motor
can be damaged if the wiper system is used under
such conditions.
(1) Front wiper / washer switch (A) "Position "
(B) "Position 0"
(C) "Position I"
(1) Rear wiper / Washer switch
To Next Page
Loading...
Need help?
General
