Settings 92
► In standby mode, press to display the main menu, and then press OPTIONS
(right softkey) > Large Font or Normal Font.
Change the Backlight Settings
Select how long the display screen remains backlit after any keypress is made.
To change the main screen backlight setting:
1.
Press > Settings > Display > Backlight.
2.
Select Backlight Dim or Backlight Off.
If you select Backlight Dim, select Always Bright, Always Dim, or a preset
length of time to elapse before the screen backlight dims.
If you select Backlight Off, select a preset length of time to elapse before the
screen and keypad backlights turn off. (When you select Always Bright for the
Backlight Dim setting in step 2, the keypad backlight will turn off after about
one minute.)
Note: Long backlight settings reduce the battery’s talk and standby times.
Set the Notification Pop-up
This option allows you to enable or disable notification pop-up when you receive a new
notification (except for incoming call and alarm) while an application is running.
1.
Press > Settings > Display > Notification.
2.
Select Enable Pop-up or Disable Pop-up.
Tip: If you select Disable Pop-up, you will see only a notification icon. (The notification
pop-up will not appear while an application is running.)
Select a Picture ID
You can select an image as a picture ID.
1.
Press > Settings > Display > Picture ID.
2.
Select Contact, Unsaved Numbers, or Private / Unknown.
If you select Contact, select an entry.
3.
Select a picture ID option and press .
To Next Page
Loading...
Need help?
General
