Kyocera Duraxa - Edit a Contacts Entry; Delete a Contacts Entry

Contacts 37
1. In standby mode, enter a phone number.
2. Press OPTIONS (right softkey) > Save. (If this is the first time you are saving an
entry to Contacts, skip to step 4.)
3. Select New Entry or Existing Entry.
4. If you chose New Entry, select a number type, and then enter the new entry name.
– or –
If you chose Existing Entry, select an entry to which you want to save the number,
and then highlight a number type and press .
5. Press DONE (left softkey) to save the entry.
Edit a Contacts Entry
Edit a Contacts Entry
You can edit existing entries in your Contacts.
1. In standby mode, press CONTACTS (right softkey).
2. Highlight the entry you want to edit and press OPTIONS (right softkey) > Edit
Contact or Edit Group.
3. Highlight the information you wish to edit.
4. Add or edit the information and press .
5. Press DONE (left softkey) or
SAVE
(left softkey) to save your changes.
Delete a Contacts Entry
You can delete existing entries from your Contacts.
1. In standby mode, press CONTACTS (right softkey).
2. Highlight an entry or a group you want to delete.
3. Press OPTIONS (right softkey) > Delete Contact or Delete Group.
4. Press DELETE (left softkey).