Contacts 42
1.
In standby mode, press CONTACTS (right softkey).
2.
Press OPTIONS (right softkey) > Settings > Speed Numbers.
ICE (In Case of Emergency) Contacts
Registering ICE information might help rescue workers, such as paramedics and police
officers, as well as hospital personnel identify your primary contact or special medical needs
you might have in case of emergency.
ICE Contacts
You can register up to five ICE contacts.
To add an ICE contact:
1. In standby mode, press CONTACTS (right softkey) > ICE.
2. Highlight Add to ICE Contacts and press or ASSIGN (left softkey).
3. Highlight the entry you want to register as an ICE contact and press .
If the entry has more than one number, press the navigation key right or left to
display the number you want to assign and then press .
To remove an ICE contact:
1. In standby mode, press CONTACTS (right softkey) > ICE.
2. Highlight an ICE contact and press REMOVE (right softkey) > YES (left softkey).
Call the ICE Contact
When you call an ICE contact, the registered emergency message and the GPS information
will be sent to the contact.
1. In standby mode, press CONTACTS (right softkey) > ICE.
Tip: When the phone is locked using the Lock Phone feature, you can also press ICE
(right softkey).
2. Highlight an ICE contact and press , , the external speaker button, or
CALL (left softkey).
3. Read the message and press OK (left softkey).
Note: When Location settings is turned off, it will be automatically turned on.
To Next Page
Loading...
Need help?
General
