4-17
Copying > Interrupt Copy
Interrupt Copy
This function allows you to pause the current jobs in progress when you need to make copies immediately. When
interruption copy ends, the machine resumes the paused print jobs.
1
Press the Interrupt key.
The current print job is temporarily interrupted.
2
Make an interrupt copy.
1 Place the originals onto the machine for interrupt copy, and configure the copy settings.
2 Press the Start key to start interrupt copying.
3
End the interrupt copy.
When interrupt copying ends, press the Interrupt key. The machine resumes the paused print
jobs.
If the machine is left unused for 60 seconds in interrupt copy mode, interrupt copying is automatically cancelled and
printing resumes. You can change the delay until interrupt copying is cancelled. Change the delay as required. For
more information, refer to Interrupt Clear Timer on page 9-25.
The interrupt copy function may be unavailable due to insufficient memory depending on the manner in which the
equipment is being utilized.
To Next Page
Loading...
Need help?
General