3-7
Common Operations > Loading Originals
Loading Originals
Placing Originals on the Platen
You may place books or magazines on the platen in addition to ordinary sheet originals.
Open the document processor, and place the original.
Before opening the document processor, be sure that there are no originals left on the original table or on the original
eject table. Originals left on the original table or on the original eject table may fall off when the document processor is
opened.
Shadows may be produced around the edges and in the middle of open-faced originals.
CAUTION
Do not leave the document processor open as there is a danger of personal injury.
Do not push the document processor forcefully when you close it. Excessive
pressure may crack the platen glass.
When placing books or magazines on the machine, do so with the document
processor in the open position.
Align it flush against the
original size indicator plates
with the back left corner as
the reference point.
Put the scanning
side facedown.
To Next Page
Loading...
Need help?
General