2-25
Preparation before Use > Command Center RX (Settings for E-mail)
Command Center RX (Settings for E-mail)
Command Center RX is a tool used for tasks such as verifying the operating status of the machine and changing the
settings for security, network printing, E-mail transmission and advanced networking.
This section explains how to access Command Center RX and configure e-mail settings. For details on Command
Center RX, refer to the Command Center RX User Guide.
The procedure for accessing Command Center RX is explained below.
1
Display the screen.
1 Launch your Web browser.
2 In the Address or Location bar, enter the machine’s IP address.
E.g.) http://192.168.48.21/
The web page displays basic information about the machine and Command Center RX as well
as their current status.
2
Configure the function.
Select a category from the navigation bar on the left of the screen. The values for each
category must be set separately.
If restrictions have been set for Command Center RX, enter a password to access pages other
than the startup page.
Here, information on the FAX settings has been omitted. For more information on using the
FAX, refer to the Fax System (U) Operation Guide.
The optional Fax Kit is required in order to make use of fax functionality.
To change settings in Command Center RX, you must log in as an administrator of the
machine.
The default factory settings are set as shown below.
Login User Name: Admin
Login Password: Admin
* Upper case and lower case letters are distinguished (case sensitive).
To Next Page
Loading...
Need help?
General