9-14
Setup, Registration, and User Management > System Menu
Error Handling
Measurement
Keyboard Layout
Item Description
Duplexing Error Select what to do when duplex printing is not possible for the selected paper size and media
type.
Value
1-sided: Printed in 1-sided
Display Error: Message to cancel printing is displayed.
Finishing Error Select alternative actions when finishing (stapling or offsetting) is not available for the selected
paper size or media type.
Value
Ignore: The setting is ignored and the job is printed.
Display Error: Message to cancel printing is displayed.
No Staple Error Select what to do when staples run out during printing.
Value
Ignore: Printing continues without stapling.
Display Error: Message to cancel printing is displayed.
NOTE: This function requires the optional document finisher.
Stapling Limit Error Select what to do when stapling capacity is exceeded during printing.
Value
Ignore: Printing continues without stapling.
Display Error: Message to cancel printing is displayed.
NOTE: This function requires the optional document finisher.
Paper Mismatch Error Select what to do when the selected paper size or type does not match paper size or type
loaded in the specified paper source while printing from the computer by specifying the
cassette or multi-purpose tray.
Value
Ignore: The setting is ignored and the job is printed.
Display Error: Message to cancel printing is displayed.
Inserted Paper Mismatch Select what to do when the paper size set for the paper source does not match the paper size
that was actually loaded.
Value
Ignore: The setting is ignored and the job is printed.
Display Error: Message to cancel printing is displayed.
Item Description
Measurement Select inch or metric for the unit for paper dimensions.
Value: mm, inch
Item Description
Keyboard Layout Change the layout of the touch panel keyboard used to enter characters.
Value: QWERTY, QWERTZ, AZERTY
To Next Page
Loading...
Need help?
General