5-2
Operation on the Machine > Loading Originals
Loading Originals
Load the originals on the platen or document processor, depending on the original size, type, volume, and function.
• Platen: Place the sheet, book, postcards, and envelopes.
• Document Processor: Place the multiple originals.
Placing Originals on the Platen
You may place books or magazines on the platen in addition to ordinary sheet originals.
When you place envelopes or cardstock on the platen
NOTE
s
For details on Original Orientation, refer to the following:
Original Orientation
(page 6-15)
NOTE
For the procedure for feeding envelopes or cardstock, refer to the following:
When you load envelopes or cardstock in the multipurpose tray
(page 5-7)
CAUTION
Do not leave the document processor open as there is a danger of personal injury.
IMPORTANT
• Do not push the document processor forcefully when you close it. Excessive pressure may crack the platen glass.
• When placing books or magazines on the machine, do so with the document processor in the open position.
2
1
1 Put the scanning side facedown.
2 Align it flush against the original
size indicator plates with the back
left corner as the reference point.
1 Put the scanning side facedown.
2 Align it flush against the original
size indicator plates with the back
left corner as the reference point.
2
1
To Next Page
Loading...
Need help?
General
