8-39
Setup and Registration (System Menu) > System Menu
Adjust/Maint.
[System Menu/Counter] key > [ā²] [ā¼] key > [Adjust/Maint.] > [OK] key
Adjust printing quality and conduct machine maintenance.
Item Description
Copy Denst. Adj. Adjust copy density.
Value: -3 Lighter, -2, -1, 0 Normal, +1, +2, +3 Darker
Send/Box Density Adjust scan density when sending or storing the data in Document Box.
Value: -3 Lighter, -2, -1, 0 Normal, +1, +2, +3 Darker
Contrast (Copy) Increases or decreases the overall contrast of copies.
Value: -3, -2, -1, 0, 1, 2, 3
Contrast (Send) Increases or decreases the overall contrast when documents are sent or saved in a document
box.
Value: -3, -2, -1, 0, 1, 2, 3
ColorCalibration This machine contains a calibration function that automatically makes adjustments to
compensate for changes that occur over time due to variations in the ambient temperature and
humidity. This function can be used for fine adjustment of tone and color drift to print in the
optimum color.
ColorCalibration
(page 10-30)
If color tone does not improve or color drift does not improve after executing this color
adjustment, refer to the following:
Color Regist.
(page 10-31)
Color Regist. When first installing the machine or moving it to a new location, color drift during printing may
occur. Use this function to correct the color position of each of cyan, magenta and yellow to
resolve color drift.
Color Regist.
(page 10-31)
Correct. Bk Line Correct fine lines (streaks caused by contamination), which may appear on the image, when
the document processor is used.
Value: Off, On
Service Setting Settings for machine maintenance and inspection. This menu is primarily used by service
technicians to perform maintenance.
To Next Page
Loading...
Need help?
General
