10-30
Troubleshooting > Adjustment/Maintenance
Adjustment/Maintenance
Overview of Adjustment/Maintenance
If there is an image problem and the message to run adjustment or maintenance menu appears, run Adjustment/
Maintenance in the system menu.
The table below lists the item you can Procedure.
ColorCalibration
This machine contains a calibration function that automatically makes adjustments to compensate for changes that
occur over time due to variations in the ambient temperature and humidity. So that the highest quality color printing can
be maintained, this color calibration operation is carried out automatically each time the power to the machine is turned
on. If color tone does not improve or color drift does not improve after executing this color adjustment, perform color print
position correction on the following:
Color Regist.
(page 10-31)
1
Display the screen.
[System Menu/Counter] key > [ā²] [ā¼] key > [Adjust/Maint.] > [OK] key > [ā²] [ā¼] key >
[ColorCalibration] > [OK] key
2
Perform the Color Calibration.
Select [Yes] to execute Color Calibration.
"Completed." is displayed and the screen returns to the Adjust/Maint. menu.
Item Description Reference Page
ColorCalibration Adjust color drift or hue of printed image in the most appropriate color. page 10-30
Color Regist. Correct the color position to resolve color drift. page 10-31
To Next Page
Loading...
Need help?
General
