Kyocera FS-1020D User Manual

Memory (CompactFlash) Card
A-8
A.3 Memory (CompactFlash) Card
Insert the memory (CF) card into the card slot located on the rear of the
printer. A memory card is a microchip card that may contain option fonts,
macros, forms, etc. The printer reads the contents of the card into its
internal memory when printer is turned on. The presence of this data in
the printer memory can be confirmed on the status page printout.
For details of available memory cards, contact your Kyocera Mita dealer.
1
Turn off the printer.
Never insert or remove a memory card while the printer power is on.
Failure to turn the power switch off will immediately halt the printer with
the four indicators turned on. It also could result in damage to the
printer’s electronic parts or the memory card. Turn the power switch on
again to restart the printer.
2
Remove the two screws from the option interface slot cover and
remove the slot cover.
Figure A-12
Note
Screws
Option Interface Slot Cover

Kyocera FS-1020D Specifications

General

Time to first page (black, normal)	10 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Internal memory	16 MB
Processor model	Power PC 405
Built-in processor	Yes
Maximum internal memory	272 MB
Powersave acoustic emission	0 dB
Sound power level (standby)	32 dB
Sound pressure level (printing)	53 dB
I/O ports	Standard interface: High speed bi-directional parallel (IEEE 1284), USB 2.0 (Full speed), KUIO LV Option-Interface slot Multiple interface connection (MIC): MIC allows for simultaneous data transfer via up to three interfaces, with each interface having its own virtual printer.
Memory upgrade	Yes GB
Power supply type	220~240V @ 50/60Hz
Networking features	As optional: 10Base-T/100Base-TX, 10Base-FL, FibreLink, TokenRing STP/UTP, Wireless LAN - IEEE 802.11b, 10Base-T/100Base-TX/100Base-FX, FibreOptic, 10Base-2/10Base-T/100Base-TX, Optional
Standard input trays	Universal paper cassette, Multipurpose tray.
Duty cycle letter size (maximum)	15000 pages per month
Maximum print size	210 x 297 mm
Media weight (tray 1)	60 -105 g/m2
Maximum ISO A-series paper size	A4
Maximum input capacity	250 sheets

Weight and Dimensions

Dimensions (WxDxH)	378 x 375 x 235 mm