Kyocera FS-1020D User Manual

Toner Container Replacement
2-2
2.1 Toner Container Replacement
When the printer runs low on toner, the (toner) indicator flashes on the
operator panel. Be sure to promptly replace the toner container and clean
the inside of the printer when this message appears.
If the printer stops printing while the (toner) indicator is lit, replace the
toner container to continue printing.
2.1.1 Toner Container Replacement Interval
Assuming an average toner coverage of 5%, with EcoPrint mode turned off
the toner container will need replacing approximately once every 7,200*
printed pages.
* In the case of a new printer in which a toner kit has been installed for
the first time, the number of copies that can be printed will be
approximately 4,000.
Toner Kit to be Used
Name: TK-18
Description: Toner container
Wiper cloth
Plastic bag
Installation Guide
(The kit supplied with the printer only contains the toner
container and wiper cloth.)
• Be sure to distance items such as floppy disks during toner container
replacement.
• Be sure to clean the inside of the printer when replacing the toner
container. For details, see section 2.2 Cleaning the Printer on page 2-
6.
• Use of original Kyocera Mita toner kits is highly recommended to
prevent printer trouble and ensure the long life of the printer.
Note

Kyocera FS-1020D Specifications

General

Time to first page (black, normal)	10 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Internal memory	16 MB
Processor model	Power PC 405
Built-in processor	Yes
Maximum internal memory	272 MB
Powersave acoustic emission	0 dB
Sound power level (standby)	32 dB
Sound pressure level (printing)	53 dB
I/O ports	Standard interface: High speed bi-directional parallel (IEEE 1284), USB 2.0 (Full speed), KUIO LV Option-Interface slot Multiple interface connection (MIC): MIC allows for simultaneous data transfer via up to three interfaces, with each interface having its own virtual printer.
Memory upgrade	Yes GB
Power supply type	220~240V @ 50/60Hz
Networking features	As optional: 10Base-T/100Base-TX, 10Base-FL, FibreLink, TokenRing STP/UTP, Wireless LAN - IEEE 802.11b, 10Base-T/100Base-TX/100Base-FX, FibreOptic, 10Base-2/10Base-T/100Base-TX, Optional
Standard input trays	Universal paper cassette, Multipurpose tray.
Duty cycle letter size (maximum)	15000 pages per month
Maximum print size	210 x 297 mm
Media weight (tray 1)	60 -105 g/m2
Maximum ISO A-series paper size	A4
Maximum input capacity	250 sheets

Weight and Dimensions

Dimensions (WxDxH)	378 x 375 x 235 mm