Kyocera KM-2540 Advanced Operation Guide

Copy Functions 1-31
Programmed Copying
Press the program number (1 to 8) to recall the program. After
registering sets of frequently used functions as a single program, you
can simply press the program number as needed to recall those
functions. You can also name the programs to identify them.
Registering Programs
Follow the steps as below to register a program.
1 Access the copy mode you would like to register and press
[Program].
2 Press [Register].
3 Press the number (1 to 8) of the program to register.
4 Enter the program name and press [End].
5 Press [Yes]. The program is registered.
Using Programs to Copy
Press the number (1 to 8) of the program to use for copying.
1 Press [Program].
2 Press the button for the desired program number (1 to 8).
3 Place the original and press the Start key. Copying begins using the
configured program.
Editing Program Names
Follow the steps as below to edit the names assigned to registered
programs.
1 Press [Program].
2 Press [Change Name].
3 Press the number (1 to 8) of the program to rename.
4 Re-enter the program name and press [End].
5 Press [Yes]. The modified program name is saved.
Register present setting
Select program number.
No registration
No registration
No registration
No registration
No registration
No registration
No registration
No registration
Note Refer to the Operation Guide for how to enter text
characters.
ProgramFunctionUser choiceBasic
Cha
Del
e
abc
Ready to copy.
Re
g
list a
list b
list c
list d
file 1
file 2
Reg
Recall
Na
m
Registration name change
Select the number for changing name.
No registration
abc
list a
list b
list c
list d
file 1
file 2
Note Refer to the Operation Guide for how to enter text
characters.

Kyocera KM-2540 Specifications

General

Brand	Kyocera
Model	KM-2540
Category	All in One Printer
Language	English