3-20 System Menu
4 Press [Close] to save settings or [Back] to cancel settings. The
display returns to the Machine Default screen.
Setting Notification Sounds
Set the notification sounds made by the machine during operation. The
setting items are as follows.
Set each item to [On] to enable sound notification. Set each item to [Off]
to disable sound notification.
1 Referring to Accessing the Machine Default Screen on page 3-11,
access the Machine Default screen.
2 Press [S] or [T] to select Notify (Touch tone), Notify (Finish), Notify
(Ready) or Notify (Attention) and press [Change #].
3 Select [Off] or [On].
4 Press [Close] to save settings or [Back] to cancel settings. The
display returns to the Machine Default screen.
Silent Mode
Configures the machine to operate more quietly. To decrease the
operating noise level, set Silent Mode to [On]. The setting items are as
follows.
1 Referring to Accessing the Machine Default Screen on page 3-11,
access the Machine Default screen.
2 Press [S] or [T] to select Silent Mode and press [Change #].
3 Select [Off] or [On].
4 Press [Close] to save settings or [Back] to cancel settings. The
display returns to the Machine Default screen.
Changing Management Code
Change the machine’s management code.
Item Description
Touch tone notification The beep sound made when a key on the
operation panel or touch panel is pressed.
Finish notification The sound made when a copy or print
operation finishes without error.
Ready notification The sound made when warm-up is
complete.
Attention notification The sound made when an error has
occurred.
Item Description
Off Do not enable Silent Mode.
On Enable Silent Mode and reduce the operating
noise level.
IMPORTANT Be sure to record the management code when
changing it. If forgotten, contact your Service Representative.
To Next Page
Loading...
Need help?
General
