Copy Functions 1-39
3 Check the orientation of the original.
4 Press [Close].
Zoom
Select the desired magnification.
1 Press [Basic]. On the next screen, press [Zoom].
2 Select the desired magnification.
For instructions on reducing/enlarging, refer to Zoom in Chapter 3 of
Operation Guide.
3 Press [Close].
Original Orientation
Check the orientation of the original.
1 Press [Basic]. On the next screen, press [Original Orient.].
2 Select [Top Edge Top] or [Top Edge Left].
3 Press [Close].
Density
Set the copy density. The setting items are as follows.
1 Press [Quality] and on the next screen press [Density].
2 Select [Auto] or [Manual].
If [Manual] is selected, press [Lighter] or [Darker] to adjust the
contrast.
3 Press [Close].
Original Image Quality
Specify the Image Quality based on the original type.
1 Press [Quality] and on the next screen, press [Original Image].
2 Select the image quality. For further details on image quality, refer to
Selecting Image Quality in Chapter 3 of Operation Guide.
3 Press [Close].
Note Incorrect copying may occur if the original is not placed
correctly.
Note Incorrect copying may occur if the original is not placed
correctly.
Item Description
Auto Automatically adjusts copy contrast.
Manual Manually adjust the copy contrast.
Place originals then press Start key.
Job Build
Ready to Job build.
Density 4
Density
Text
Original
Basic
Quality
EcoPrint
Off
Edit
1 sided copy-Left
Finished page #:
Step-
Image
To Next Page
Loading...
Need help?
General
