Introduction Getting Ready
Taking Pictures
Playback Set Up
GB-161
[BRIGHT CNTRL] Adjusting the LCD Monitor Brightness | [FORMAT] Initializing Memory Cards | [POWER SAVE] Having the Camera Turn Off Automatically to Save Power | [MODE LOCK] Preserving Your
Function Settings | [BEEP] Adjusting the Volume of the Camera Button Beep | [SHUTTER VOL] Adjusting the Volume of the Shutter Sound | [SELECT LCD] Selecting the Display Used at Startup | [START
SCREEN] Selecting the Startup Screen | [ZLANGUAGE] Selecting the Menu Language | [VIDEO OUT] Setting the Output Format for a TV Connection | [FILE NO.] Starting Image File Numbers from 0001 |
[MODE RESET] Resetting Function Settings
BACK
Contents (Top page) Detailed Contents Index Nomenclature Menus and Settings Troubleshooting
5
Press the up button u to select [SET]
and then press the OK button E.
The user-defined screen is set and the Set Up menu screen reappears.
Turning the startup screen off
1
Set the mode select dial to "G" and
turn the camera on.
2
Press the up u or down d button to
select [START SCREEN] and then press
the right button r.
3
Press the right button r to select [OFF].
4
Press the OK button E.
The startup screen is set to OFF and the Set Up menu screen reappears.
BNote
• This setting is retained when you turn the camera off.
• Because the selected image is stored in the camera's memory, switching memory cards
or erasing the image from the memory card does not affect the image set in the startup
screen.
BNote
This setting is retained when you turn the camera off.
APPLY
SETTINGS?
SET
CANCEL
MODE LOCK
BEEP
SHUTTER VOL
SELECT LCD
START SCREEN
OFF
+
2
+
2
EVF
SET
SET UP(2/3)
REC REVIEW
2SEC
To Next Page
Loading...
Need help?
General
