Introduction Getting Ready
Taking Pictures
Playback Set Up
GB-40
Taking Still Images
|
Using Continuous Shooting Mode
|
Shooting Movies
|
Selecting Scenes to Automatically Set the Focus and Flash
|
[
k
] Using Self-Timer
|
Using Zoom (Wide-angle and
Telephoto)
|
Using Flash
|
Adjusting Brightness
|
Setting Focus
|
Displaying Information on the LCD Monitor
|
Selecting the Number of Pixels (Image Size) and the Quality
|
Adjusting Image
Colors and Other Settings
|
Switching Display Screen (Electronic Viewfinder and LCD Monitor)
|
Setting the exposure and focus during continuous shooting (Drive mode)
NEXTBACK
Contents (Top page) Detailed Contents Index Nomenclature Menus and Settings Troubleshooting
6
Press the MENU button K.
The P icon appears on the LCD monitor.
[
N
] Setting the Frame Rate for Movies (frames per
second)
«Applicable mode: M»
The frame rate refers to the number of frames shot per second in a movie.
The available frame rate settings are 30 frames per second [30fps] and 15
frames per second [15fps].
Movement in movies with a frame rate of 30 fps is smooth, but the available
shooting time for 30 fps movies is shorter than for movies shot at 15 fps.
1
Set the mode select dial to "M" and turn
the camera on.
2
Press the MENU button K to display the menu icons.
3
Use the left l or right r button to select
[FRAME/SEC] N and then press the OK
button E.
A Important
This setting is retained when you turn the camera off.
A Important
Remove the lens cap before turning the camera on.
FRAME/SEC
To Next Page
Loading...
Need help?
General
