Introduction Getting Ready
Taking Pictures
Playback Set Up
GB-64
Taking Still Images
|
Using Continuous Shooting Mode
|
Shooting Movies
|
Selecting Scenes to Automatically Set the Focus and Flash
|
[
k
] Using Self-Timer
|
Using Zoom (Wide-angle and
Telephoto)
|
Using Flash
|
Adjusting Brightness
|
Setting Focus
|
Displaying Information on the LCD Monitor
|
Selecting the Number of Pixels (Image Size) and the Quality
|
Adjusting Image
Colors and Other Settings
|
Switching Display Screen (Electronic Viewfinder and LCD Monitor)
|
Setting the exposure and focus during continuous shooting (Drive mode)
NEXTBACK
Contents (Top page) Detailed Contents Index Nomenclature Menus and Settings Troubleshooting
6
Press the MENU button K.
The icon for the specified number of seconds appears on the LCD
monitor.
[ISO] Changing the ISO Sensitivity to Shoot Fast
Moving Subjects
«Applicable mode: S»
The [ISO] setting corresponds to the ISO value of conventional film and
indicates sensitivity to light.
The [ISO] can be set to [AUTO], [100], [200], [400] or [800], with the image
quality declining as the number increases. Increasing the camera's
sensitivity to light allows you to take pictures in dark locations or use fast
shutter speeds. It also slightly increases the effective range of the flash.
The default [ISO] setting is [AUTO], in which the camera sets the ISO
sensitivity to suit the ambient conditions.
1
Set the mode select dial to "S" and turn
the camera on.
2
Press the MENU button K to display the menu icons.
A Important
• Setting a slow shutter speed may result in 'noise' in the image.
• When you turn the camera off, the long exposure setting is cancelled and the camera
reverts to normal shooting (default).
• Take care to avoid camera shake. (Æ
p.56)
• When a long exposure is set, the [SHTR PRTY] AE mode setting cannot be selected.
A Important
Remove the lens cap before turning the camera on.
LT4S
To Next Page
Loading...
Need help?
General
