Kyocera PH-7C User Manual

6-32
Machine transportation after setup > Procedure for the main unit transportation (Truck transportation)
[CONFIDENTIAL]
(2)Install after transportation
1
Pull out cassette 1 [A].
2
Remove the lift plate stopper [B] and attach it to the storage location.
3
Remove the tape from spacer [C].
4
Re-insert cassette 1 [A] and repeat same procedures 9 to 12 for cassette 2 as well.
5
Pull out cassette 3 [A].
6
Remove the lift plate stopper [B] and attach it to the storage location.
7
Re-insert cassette 3 [A] and repeat same procedures 13 to 15 for cassette 4 as well.
IMPORTANT
Wear rubber gloves in handling. (If the liquid get your hands, rinse it immediately with water.)

Kyocera PH-7C Specifications

General

Brand	Kyocera
Model	PH-7C
Category	Finishers
Language	English