COMPONENT MAINTENANCE MANUAL
AVIATION PRODUCTS
Model FA5000
Fits and Clearances
23–70–30
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
Rev. 02 Page 803
July 21/17
C. Crash- and Fire-Survival Characteristics
Table 2. Environmental Specifications for CSMU Assembly
Characteristic Type Certification Measurement
Static Crush ED–112 5,000 lbs.
Fire Protection TSO–C123b/ED–112 50,000 BTU/sq. feet/hour, 60 minutes
@ 1100_C and 10 hours @ 260_C
Impact ED–112 3400 g’s, 6.5 ms, half-sine shock wave
Penetration ED–112 500 lbs./10 feet/1/4” probe
D. Environmental Characteristics
Refer to Table 801 for the Model FA5000 environmental characteristics.
E. Torque Requirements
Assembly Item Torque Requirement
CSMU & Beacon Bracket Mounting Screws 75 in./lbs.
Rear Cover Screws, Aircraft Interface PWA 9 − 10 in./lbs.
J1 Connector Screws, Memory Cable Screws, Cover
Plate Screws, Bottom Main Processor Screw
5 − 6 in./lbs.
J2 Connector and Cover Screws 2 − 3 in./lbs.
The document reference is online, please check the correspondence between the online documentation and the printed version.
To Next Page
Loading...
Need help?
General
