13: Maintenance
SLC™ 8000 Advanced Console Manager User Guide 306
Diagnostics
The Maintenance > Diagnostics page provides methods for diagnosing problems such as network
connectivity and device port input/output problems. You can use equivalent commands on the
command line interface.
1. Click the Maintenance tab and select the Diagnostics option. The following page displays:
Figure 13-7 Maintenance > Diagnostics
2. Select Diagnostics from checklist (one or more diagnostic methods you want to run, or select
All to run them all):
IPv4 ARP Table The IPv4 Address Resolution Protocol (ARP) table used to view the IP address-to-
hardware address mapping.
To Next Page
Loading...
Need help?
General
