6: Basic Parameters
SLCâ„¢ 8000 Advanced Console Manager User Guide 78
Advanced Cellular Gateway Configuration
Fail-Over Cellular Gateway Firmware
Note: The HSPA+ or Sierra fail-over device must be selected in order for you to be able
to update the firmware.
New Admin
Password/Retype
For the selected Fail-over Device, the administrator password can be changed on
the gateway. The password may have up to 64 characters.
To change the Admin Password, click the Change Admin Password checkbox and
enter the new password in the New Admin Password and Retype fields. Changing
the HSPA+ Admin password will save the password on the SLC for status and
configuration queries to the HSPA+ gateway. The password must match what is
stored on the HSPA+ gateway. Changing the Sierra Admin password will save the
password on the SLC for status and configuration queries to the Sierra gateway.
The new password will also be configured on the Sierra gateway. The Sierra
gateway login must be set as ‘user’.
Reboot Gateway
When Making
Changes (check
box)
For the selected Fail-over Device, the administrator can reboot the gateway.
Fail-Over Cellular
Gateway Status
(link)
Clicking the link opens the Fail-Over Cellular Gateway status window, showing
status and statistics about the fail-over gateway.
Click Back to Network Settings to return to the Network Settings page.
SIM Card PIN Lock
(check box)
For the HSPA+ and Sierra gateways, enable a lock so that the SIM card used by the
gateway cannot be used by anyone who does not have the PIN.
Pin # for SIM Card/
Retype
For the HSPA+ and Sierra gateways, the PIN number for the SIM card used by the
gateway. May have up to 8 characters.
SIM PUK/Retype For the HSPA+ gateway, the SIM Personal Unblocking Key. May have up to 16
characters. The Sierra gateway does not have this feature.
SIM Username For the HSPA+ gateway, enter the username for dial up to the cellular carrier, if
required. May have up to 64 characters. The Sierra gateway does not have this
feature.
SIM Password For the HSPA+ gateway, enter the password for dial up to the cellular carrier, if
required. May have up to 64 characters. The Sierra gateway does not have this
feature.
Dial-up String For the HSPA+ gateway, enter the modem string used for making a connection to
the carrier. May have up to 64 characters. The Sierra gateway does not have this
feature.
Roaming For the HSPA+ gateway, enable or disable network roaming. The Sierra gateway
does not have this feature.
Update Firmware
(check box)
Select this option to update firmware on the HSPA+ gateway or the Sierra gateway.
The Functional Firmware file and the Radio Firmware file (required for the Sierra
gateway only) will be transferred to the SLC using the method selected by the Load
Firmware via option. Once the file(s) have been transferred to the SLC, the SLC
will initiate the firmware update on the gateway.
Functional Firmware
Filename
Enter the name of the firmware filename exactly as it is represented.
To Next Page
Loading...
Need help?
General
