15: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 408
Parameters
treedisplay <enable|disable>
mapdevice <enable|disable>
email <Email Address>
Defaults: treedisplay=enable
Description
Displays information about USB buses and the devices connected to them, including the mapping
between a USB device and the SLC port.
Note: For "mapdevice enable", the port names will displayed at the end of the line in
square brackets. To see a list of USB devices with vendor id and product id, use
'treedisplay disable'.
USB Storage Commands
set usb storage dir
Syntax
set usb storage dir <U1|U2> [subdir <Directory Path>]
Description
Views a directory listing of a USB flash drive.
set usb storage fsck
Syntax
set usb storage fsck <U1|U2>
Description
Runs a file system check on a thumb drive (recommended if it does not mount).
set usb storage format
Syntax
set usb storage format <U1|U2> [filesystem <ext2|fat16|fat32>]
Description
Formats a USB flash drive.
To Next Page
Loading...
Need help?
General
