13: Maintenance
SLC™ 8000 Advanced Console Manager User Guide 311
4. To email these report(s), follow the instructions in Emailing Logs and Reports (on page 311).
Status Commands
Go to Status Commands to view CLI commands which correspond to the web page entries
described above.
Emailing Logs and Reports
The following logs and reports can be directly emailed to a specific individual or to Lantronix
Technical Support directly from the log page:
System Log (Figure 13-4)
Audit Log (Figure 13-5)
Email Log (Figure 13-6)
Diagnostic Reports (Figure 13-8)
Status/Reports (Figure 13-10)
To email a log to an individual:
1. In the Comment field of a particular log or report page, enter a comment (if desired).
2. Select the to field beside the empty field where you then enter the person's email address.
3. Press the Email Output button. An email is immediately sent out and a confirmation appears
on the screen.
To Next Page
Loading...
Need help?
General
