Lantronix XPort User Guide

4: Configuration Using Web Manager
XPort® Device Server User Guide 34
Connection Settings - UDP
To configure a channel’s UDP settings:
1. On the main menu, click Connection. The Connection Settings window for the selected
channel displays.
2. In the available fields, enter or modify the following information:
Figure 4-8. UDP Connection Settings
Connect Protocol
Protocol
Select UDP from the drop-down menu.
Datagram Mode
Datagram Type
Configures the remote IP or network broadcast address and
the remote port. Enter 01 for directed or broadcast UDP. The
default setting is 00.
Accept Incoming
Select Yes to accept incoming UDP datagrams.
Endpoint Configuration
Local Port
Enter the local port number.
Remote Port
Enter the port number of the remote device.
Remote Host
Enter the IP address of the remote device.
Use Broadcast
Select to broadcast the UDP datagram. The default is not to

Lantronix XPort Specifications

General

Brand	Lantronix
Model	XPort
Category	Server
Language	English