Lantronix XPort User Guide

7: 59BSetup Mode: Channel Configuration
XPort® Device Server User Guide 52
Connect Mode Option
7
6
5
4
3
2
1
0
Data Echo & Modem Response (Numeric)
0
1
1
1
1
Data Echo & Modem Response (Verbose)
0
1
1
1
0
Modem Response Only (Numeric)
0
0
1
1
1
1
Modem Response Only (Verbose)
0
0
1
1
1
0
a) Incoming Connection
Never Accept Incoming
Rejects all external connection attempts.
Accept with active Modem
Control In
Accepts external connection requests only when the Modem
Control In input is asserted. Cannot be used with Modem
Mode.
Always Accept
Accepts any incoming connection when a connection is not
already established. Default setting.
b) Response
Character Response
A single character is transmitted to the serial port when there is a
change in connection state:
C = connected, D = disconnected, N = host unreachable.
The IP address of the host connecting to the CoBos device will
be provided when you use verbose mode.
This option is overridden when the Active Start Modem Mode
or Active Start Host List is in effect. Default setting is Nothing
(quiet).
c) Active Startup
No Active Startup
Does not attempt to initiate a connection under any
circumstance. Default setting.
With Any Character
Attempts to connect when any character is received from the
serial port.
With active Modem Control
In
Attempts to connect when the Modem Control In input changes
from not asserted to asserted.
With a Specific Start
Character
Attempts to connect when it receives a specific start character
from the serial port. The default start character is carriage return.

Lantronix XPort Specifications

General

Brand	Lantronix
Model	XPort
Category	Server
Language	English