Lantronix XPort User Guide

4: Configuration Using Web Manager
XPort® Device Server User Guide 36
messages. Spaces are not permitted.
Recipients
Recipient 1: Email Address
Enter the email address designated to receive email
notifications.
Recipient 2: Email Address
Enter an additional email address designated to receive email
notifications.
3. When you are finished, click the OK button.
4. On the main menu, click Apply Settings.
Trigger Configuration
A trigger event occurs when the unit receives the specified trigger input resulting from a
specified combination of conditions on the configurable pins.
Set the configurable pins to Active, Inactive, or None. The configurable pins are disabled if
they are all set to None. If both the serial sequence and the configurable pins are disabled,
the trigger is disabled.
To configure the XPort module’s email trigger settings:
1. On the main menu, click Trigger 1, Trigger 2, or Trigger 3 to configure the
desired trigger settings. The Email Trigger Settings page opens.
Figure 4-10. Email Trigger Settings
2. Configure or modify the following fields:
Conditions
Configurable Pins
Select the condition from the drop-down menu for the

Lantronix XPort Specifications

General

Brand	Lantronix
Model	XPort
Category	Server
Language	English